Caravan Oil

 The Main Factors that needs to be considering while selection of greases are  “LETS”. L-Load E-Environment T-Temperature S-Speed Grease is made up of three main components: a base oil, a thickener and additives that enhance performance. This combination enables grease to be “squeezed” between surfaces, gradually releasing oil into the areas requiring lubrication — not unlike squeezing a sponge to release fluids held in suspension. The greater the sheer force applied to the grease, the faster the oil and additives are released. The viscosity of the base oil used in a particular grease plays a role in determining the grease’s load carrying ability and how well it will perform under extreme pressure and temperature. Load carrying ability ratings are reported on data sheets as the four-ball weld load and the Timken “OK” load. The higher the numbers, the greater the load carrying capacity, and the greater the grease’s ability to withstand heavy loads without breaking down. Heavy-d...

grease distributor   Industrial lubricants: grease distributor Contamination in  Industrial lubricants  will cause wear and tear in machines. Due to Particulate contamination & ingression of moisture it doesn’t take long for equipment to become gritty, dirty, and full of debris. It is hard to avoid in all equipment which use hydraulic or lube oil. Preventing the contamination is much easier and less expensive than clearing it from the contamination system. What are the causes for the  contamination in machine lubricants ? There are many reasons for solid particle contamination. It can occur due to the addition of new oil. Built in contamination Along with the ambient air created by machine, machine borne particles will enter the lubrication system. Water contamination can happen when oil stored outside will get exposed to the adverse weather. Water spillage during the production process can also contribute to the water contamination. What are steps we can follow ...